| FA22590 | What is the selection criterion of Circuit Breakers for the Capacitor bank application. The selection should be done after derating the Circuit Breaker taking into consideration voltage variation and capacitors tolerances that could increase... |
| FA12064 | How to change page resolution in configured project of Vijeo Citect. S In order to change the resolution of the pages in Vijeo Citect project do following things: 1. Add the following INI parameter through... |
| FA12081 | What is the Life Cycle Assessment (LCA) for the Multi9 product range. For Multi9 product ranges, Mean Time To Failure (MTTF) values is used for assessment of the product life cycle.
MTTF is the estimated reliability... |
| FA12092 | What are the cable references for PC and XBTN200 connection with TSX3708056DR1. The cable references for PC and XBTN200 connection with TSX3708056DR1 are as follows: 1 Cable between TSX3708056DR1 & HMI XBTN200 is ‘XBTZ9780’ 2... |
| FA21078 | How to join two strings with result more than 16 characters in Unity Pro. By default the maximum characters allowed for the STRING data type is only 16. It can be increased to 65534 ASCII characters.
For this select the... |
| FA22433 | What is the broadcast address in terms of Ethernet network. A broadcast address is an IP address that is used to target all systems on a specific subnet network instead of single hosts.
In other words broadcast... |
| FA12095 | What is the difference between ModSoft PID function and Concept PID function. The difference between ModSoft PID and Concept PID loops are as follows: PID (ModSoft): ... |
| FA12088 | How to convert a Modsoft Program to a Concept database. The procedure for converting the ModSoft program into a ConceptDatabase is as follows: 1 Open the Modsoft Converter from the Concept utility. (Start... |
| FA21086 | How to calculate the scan time of Hot Stand-By (HSBY) system in Modicon Quantum range. Considering the Hot Stand-By system, the scan time mainly comes from the addition of three parts:
Part 1: User application logic execution time,... |
| FA21084 | How to convert an application developed in ProWorx Plus V1.65 to Concept V2.6 software. ProWorx Plus is DOS based software. However, the offline databases for ProWorx Plus and ProWorx NxT are identical. The offline database can be opened... |