FAQs

FAQ Search
>   Select Language
Most Recently Published FAQs

Results 61 - 70 of 100

FAQ ID Description
FA22664Is it possible to write a new IP address of connected device at runtime in Vijeo Designer.
Yes, it is possible to write a new IP address of connected devices via scripting during runtime. This feature has been implemented in Vijeo Designer...
FA12037What are the techniques to optimize the memory usage of Vijeo Designer project.
The following are helpful guidelines to optimize the memory usage of Vijeo Designer project. 1. Delete unused variables2. Use indirect addresses and...
FA12038What is the naming convention for Vijeo Designer application.
The following characters are valid characters that can be used for naming parts, devices, object, variables and passwords in Vijeo-Designer. a) Alphabet...
FA11613How to equate string type variables in Vijeo Designer application.
Generally arithmetic operators like +,-,*,== etc, are applicable on registers like INT, DINT, REAL etc, holding arithmetic values.  The script method...
FA117How can you configure timer in Magelis XBT GT terminal to turn off the light on the screen.
There are different ways available in Vijeo Designer software to control Backlight.1) During Runtime:You can do the required configuration through...
FA11612How to get logarithm of base 10 value in Vijeo Designer software.
Only natural logarithm(of base e) is available under Math package of standard Java package version associated with Vijeo Designer software.A workaround...
FA11565How to display Float data type register value of an external device like PLCs at XBT GT terminal screen correctly.
To display correctly float data type register value on Magelis XBT GT terminal screen, it is required to make sure to select ‘Low Order First’ option...
FA116How to change default back-up path of project in Vijeo Designer.
The default back-up path of the project can be changed as follows: 1)Through software installation:After Vijeo-Designer is installed, the best way...
FA11563How to switch panels based on time in Magelis XBT G/GT terminals automatically.
In order to switch panel automatically based on time a script has to be written during the application development stage.Below is the sample script:int...
FA12151What is the meaning of OC1 fault in Altivar 21 Drive.
The meaning of OC1 is over current during Acceleration. This fault appears when the motor is drawing excess current during acceleration. Main probable...

Results 61 - 70 of 100