| FA22602 | What are the different communication settings available with the Micrologic 5 and 6 in Compact NSX. There are three types of communication settings achievable as per the hardware used with Micrologic 5 or 6 in Compact NSX.
In config A - With... |
| FA22778 | Is it possible to convert the alarm messages history into other file format in SFT2841 software. The SFT2841 software is the setting and operating tool for Sepam Series 20, Series 40 and Series 80 relays. It may be used in one of three operating... |
| FA12103 | How to deactivate the Earth Fault protection in Micrologic 6.0 trip unit of Masterpact ACB. To deactivate the Earth Fault protection function in Micrologic 6.0 trip unit, follow the below procedure:1. On the Masterpact Air Circuit Breaker... |
| FA12102 | Is it possible to modify the neutral position in Masterpact ACB from left hand side to right hand side. The offer for Masterpact Air Circuit Breaker (ACB) with neutral position on the both sides is available. This option has to be selected at the time... |
| FA22779 | What is the behavior of the EM9 monitoring device if the Neutral & Earth terminals are directly connected. EM9 Insulation monitoring device (IMD) is used on IT network system. In IT network system Neutral is isolated from Earth. EM9 measure the insulation... |
| FA12205 | What are the Shock and Vibration values of C60 range MCBs. Refer attachment for the Shock and Vibration Values of C60 range MCBs. |
| FA12097 | How many Ethernet devices can be connected via ETG100 gateway module at a time. Total numbers of devices (PLC/HMI) which can be connected on Modbus TCP/IP network to communicate with Modbus slave devices via ETG100 gateway module... |
| FA22591 | Why is it not possible to have a built in motor mechanism for Compact NS630 LB and NS800 LB Circuit Breakers. The basic frames of the Compact NS630b LB and NS800 LB Circuit Breakers have been modified as compared to the basic frame for the other Circuit Breakers... |