Options and Accessories - FAQs

FAQ Search
>   Select Language
Most Recently Published FAQs

Results 1 - 10 of 63

FAQ ID Description
FA156051What are the Share-UPS and Interface Expander modes of operation?
Issue What are the Share-UPS and Interface Expander modes of operation? Product Line UPS Device Management AP9607/AP9607CB...
FA230777Which accessories/environmental sensors are compatible with my Network Management Card (or devices with embedded Network Management Cards)?
Issue Which accessories or environmental sensors are compatible with my Network Management Card (or devices with embedded Network Management Cards)? Product...
FA22590What is the selection criterion of Circuit Breakers for the Capacitor bank application.
The selection should be done after derating the Circuit Breaker taking into consideration voltage variation and capacitors tolerances that could increase...
FA12092What are the cable references for PC and XBTN200 connection with TSX3708056DR1.
The cable references for PC and XBTN200 connection with TSX3708056DR1 are as follows: 1 Cable between TSX3708056DR1 & HMI XBTN200 is ‘XBTZ9780’ 2...
FA12090What is the reference of the RS232 Communication Cable for communicating ProWorx32 Server (372SPU78001PSEV) with Micro10 PLC.
Three premade RS232 Communication cable assemblies are available for establishing communication between ProWorx32 Server (372SPU78001PSEV) with Micro10...
FA12093What are the different part references for the programming software and communication cable to be used for Modicon Micro Range PLCs.
There are three different PL7 software packages that can be used for programming of the Modicon Micro Range of PLCs. 1. TLXCDPL7PP45M.....PL7 PRO...
FA21072What is the part number of battery (with connector cable) for Modicon Micro range PLC 110CPU31102.
The part reference of the battery for Modicon Micro range PLCs are as follows: Lithium battery assembly 110XCP98000. Battery capacitor assembly...
FA12089What is the programming cable reference that can be used for USB communication between Quantum PLC and PC.
The programming cable reference that can be used for USB communication between Quantum PLC and PC is UNYXCAUSB232.
FA11881What is the part number of the cable used for communication between TSXSCP114 PCMCIA card and other RS485 device.
TSXSCPCM4030 cable is required from TSXSCP114 PCMCIA card to the Modbus branching device TSXSCA50 for connecting other RS485 device on the Modbus...
FA12018What are the functions of the PCMCIA Card batteries, TSXBATM02 and TSXBATM03.
TSXBATM02 battery provides the necessary power backup to save the content of the RAM PCMCIA when the PCMCIA Card is out of the PLC or when the PLC...

Results 1 - 10 of 63