| FA22590 | What is the selection criterion of Circuit Breakers for the Capacitor bank application. The selection should be done after derating the Circuit Breaker taking into consideration voltage variation and capacitors tolerances that could increase... |
| FA12081 | What is the Life Cycle Assessment (LCA) for the Multi9 product range. For Multi9 product ranges, Mean Time To Failure (MTTF) values is used for assessment of the product life cycle.
MTTF is the estimated reliability... |
| FA22433 | What is the broadcast address in terms of Ethernet network. A broadcast address is an IP address that is used to target all systems on a specific subnet network instead of single hosts.
In other words broadcast... |
| FA21086 | How to calculate the scan time of Hot Stand-By (HSBY) system in Modicon Quantum range. Considering the Hot Stand-By system, the scan time mainly comes from the addition of three parts:
Part 1: User application logic execution time,... |
| FA22434 | How to fix the Error "User Interface Kernel (UIK)" in Concept. The error "User Interface Kernel" (UIK) comes due to failure of reading the desktop file. The desktop file (project name .dsk) which contains screen... |
| FA21079 | How to check the health status of CRA module 140CRA93100 in Concept. Function block STAT can be used under 984LL section in Concept to check the health status of CRA module 140CRA93100. It will give the communication... |
| FA12099 | What is the accuracy of the Premium PLC CPU real time clock. Real time clock accuracy:Accuracy of the real time clock is one second (%SW50) +/- 200ms.Resolution of the real time clock is one second (%SW50) +/-... |
| FA21072 | What is the part number of battery (with connector cable) for Modicon Micro range PLC 110CPU31102. The part reference of the battery for Modicon Micro range PLCs are as follows:
Lithium battery assembly 110XCP98000.
Battery capacitor assembly... |
| FA11881 | What is the part number of the cable used for communication between TSXSCP114 PCMCIA card and other RS485 device. TSXSCPCM4030 cable is required from TSXSCP114 PCMCIA card to the Modbus branching device TSXSCA50 for connecting other RS485 device on the Modbus... |
| FA12018 | What are the functions of the PCMCIA Card batteries, TSXBATM02 and TSXBATM03. TSXBATM02 battery provides the necessary power backup to save the content of the RAM PCMCIA when the PCMCIA Card is out of the PLC or when the PLC... |